3U RACKMOUNT/ RMC3F2-XP
 |
RMC3F2-XP is designed for entry-level applications
where space is a concern, yet riser card or
low-profile PCI requirements of 2U are not
desirable. Up to 12” x 13” Extended
ATX or SSI EEB 3.5 compliant motherboards are
supported in this chassis. |
|
|
Material: |
Heavy-duty SPGC
cold-rolled steel
|
Outside: |
Texture-coated
|
Dimension: |
26"(D) X
19"(W) X 5.25"(H) |
Cooling: |
Standard:
Middle: 3 x 80x25mm ball-bearing fans
Rear: 2 x 60x25mm ball-bearing fans
Optional:
Middle: (+ optional 1 x 80x25mm) (optional 3 x
80x32mm upgrade)
Rear: (optional 3 x 60x38mm upgrade) |
Power
Supply: |
300W ~ 600W ATX/EPS
single or redundant power supplies
|
Expansion: |
7 full-length
slots
|
Controls: |
Power on/off and
system reset + dual USB
|
Indicators: |
Power and HDD
LED’s
|
System
Board: |
Up to 12”(W)
x 13”(D) E-ATX/SSI EEB 3.5 compliant MB |
Drive
Bay: |
External 5.25" x
6
External 3.5" x 1
internal 3.5" x 1
|
Temperature: |
0°C(32°F)
~ 50°C(122°F)
|
Humidity: |
5% ~ 95% non-condensing |
|
|
Current product don't have riser card options.
BR-2U03 |
Rear supporting brackets with 8” extension |
BR-2U05 |
Center mounting brackets (2U - 5U) |
SR-26 |
26” ball-bearing slide rails with Q/D |
|
|
| Hot swap hard drive options |
RMC3F2-XP do not have Hot-swap Hard Drive.
Motherboard compatibility |
| |
Compatible |
|
Not Compatible |
|
Based on the motherboard layout, extension wires
/ cables for fan, Intrusion switch and other devices may be required.
They can be ordered separately.
** Special CPU Mounting Brackets required if CPU brackets are to
be mounted on chassis. Otherwise, standard bracket can be used. |
