2U RACKMOUNT/ RMC2N2-XP
 |
RMC2N2-XP chassis is designed with flexibility
in mind. Four 5.25” bays allows user
to install CDs, DVDs, 1x or 3x hot-swappable
drive canisters. It is the ideal platform for
Entry-level File Server and Network Attached
Storage applications. |
|
|
Material: |
Heavy-duty cold-rolled
steel
|
Inside: |
Zinc-plated with
bright chromate
|
Outside: |
Texture-coated
|
Dimension: |
22.5"(D)
X 19"(W) X 3.5"(H) |
Cooling: |
Standard:
Middle: 2 x 80x25mm + 1 x 40x28mm easy-swap fans
Optional:
Middle: (+ optional 3 x 40x28mm)
|
Power
Supply: |
300W ~ 460W ATX
PFC single or redundant power supplies
|
Expansion: |
3-slot PCI via
riser card or 7 low-profile slots
|
Controls: |
Power on/off,
system reset, and 2 USB ports
|
Indicators: |
Power, LAN and
HDD LED's
|
System
Board: |
Up to 12”(W)
x 10.5”(D) size ATX/SSI CEB compliant motherboards |
Drive
Bay: |
External 5.25" x
4
External 3.5" x 1
internal 3.5" x 1
|
Temperature: |
0°C(32F)~50°C(122F)
|
Humidity: |
5%-95% non-condensing |
|
|
| ∆ |
Size & Type |
+5VDC |
+12VDC |
-12VDC |
-5VDC |
+3.3VDC |
+5VDC |
| 4 |
300W
ATX PFC |
35A |
16A |
0.5A |
1A |
20A |
1.5A |
|
RC2-007 |
3 x 32-bit
PCI slots |
RC2-012 |
2 x 64-bit
PCI slots |
RC2-PAPTX-PCI |
2 x 64-bit
PCI + 1 x 4X AGP slots with offset AGP daughter
board |
RC2-PAPTX-AGP |
2 x 64-bit
PCI + 1 x 8X AGP slots with ribbon cable for
PCI |
RC2-PCITX-3N1 |
3 x 64-bit
PCI with bottom one slot on ribbon cable |
RC2-PCITX-3S1 |
3 x 64-bit
PCI with bottom two slot on ribbon cable |
RC2-012-R |
2 x 64-bit
PCI slots Reversed (require special back panel) |
RC2-PAPRX16-1 |
2 x 32-bit
PCI + 1 x 16X PCI-E slots |
RC2-PEPRX16 |
2 x 64-bit
PCI + 1 x 16X PCI-E slots |
|
|
BR-2U01 |
Center-mounting brackets (2U only) |
BR-2U03 |
Rear supporting brackets with 8” extension |
SR-20 |
20” ball-bearing slide rails with Q/D |
SR-26 |
26” ball-bearing slide rails with Q/D |
|
|
| Hot swap hard drive options |
RMC2N2-XP do not have Hot-swap Hard Drive.
Motherboard compatibility |
| |
Compatible |
|
Not Compatible |
|
Based on the motherboard layout, extension wires
/ cables for fan, Intrusion switch and other devices may be required.
They can be ordered separately.
** Special CPU Mounting Brackets required if CPU brackets are to
be mounted on chassis. Otherwise, standard bracket can be used. |
