2U RACKMOUNT/ RMC2E2-XP
 |
RMC2E2-XP is designed specifically for OEMs and
System Integrators who are looking for a design
platform for Network Attached Storage or iSCSI
Target. Equipped with twelve hot-swap drive
bays supporting SCSI, and SATA HDD, RMC2E2-XP
makes product development easy for the serious
storage professionals. |
|
|
Material: |
Heavy-duty cold-rolled
steel
|
Inside: |
Zinc-plated with
bright chromate
|
Outside: |
Texture-coated
|
Dimension: |
27"(D) X
19"(W) X 3.5"(H) |
Cooling: |
Standard:
Middle: 4 x 40x28mm + 2 x 80x32mm easy-swap fans
|
Power
Supply: |
460W ~ 600W single
or redundant ATX/EPS PFC power supplies
|
Expansion: |
3 x PCI slots
via riser card or 7 low-profile slots
|
Controls: |
Power on/off and
system reset on front bezel or on back panel
|
Indicators: |
Power, 2 x LAN,
and HDD LED's
|
System
Board: |
12”(W) x
13”(D) E-ATX/SSI EEB 3.5 compliant motherboard |
Drive
Bay: |
internal 2.5" x
1 (+ 1 x 2.5” HDD optional)
Hotswap Bay x 12
|
Temperature: |
0°C(32F)~50°C(122F)
|
Humidity: |
5%-95% non-condensing |
|
|
| ∆ |
Size & Type |
+5VDC |
+12VDC |
-12VDC |
-5VDC |
+3.3VDC |
+5VDC |
| 9I |
460W
EPS |
40A |
32A |
0.8A |
1A |
30A |
2A |
| KI |
460W
EPS HRP w/PFC |
30A |
32A |
0.7A |
0.7A |
24A |
2A |
|
RC2-007 |
3 x 32-bit
PCI slots |
RC2-012 |
2 x 64-bit
PCI slots |
RC2-PAPTX-PCI |
2 x 64-bit
PCI + 1 x 4X AGP slots with offset AGP daughter
board |
RC2-PAPTX-AGP |
2 x 64-bit
PCI + 1 x 8X AGP slots with ribbon cable for
PCI |
RC2-PCITX-3N1 |
3 x 64-bit
PCI with bottom one slot on ribbon cable |
RC2-PCITX-3S1 |
3 x 64-bit
PCI with bottom two slot on ribbon cable |
RC2-012-R |
2 x 64-bit
PCI slots Reversed (require special back panel) |
RC2-PAPRX16-1 |
2 x 32-bit
PCI + 1 x 16X PCI-E slots |
RC2-PEPRX16 |
2 x 64-bit
PCI + 1 x 16X PCI-E slots |
|
|
SR-FR28-BN |
28” solid-bearing slide rail with Q/D
(included) |
|
|
| Hot swap hard drive options |
RMC2E2-XP do not have Hot-swap Hard Drive.
Motherboard compatibility |
| |
Compatible |
|
Not Compatible |
|
Based on the motherboard layout, extension wires
/ cables for fan, Intrusion switch and other devices may be required.
They can be ordered separately.
** Special CPU Mounting Brackets required if CPU brackets are to
be mounted on chassis. Otherwise, standard bracket can be used. |
