2U RACKMOUNT/ RMC2A2
 |
RMC2A2 chassis is designed specifically for Entry-level
server, Computer Telephony and Appliance applications
with 17” depth and excellent air flow.
It supports a full range of single procesor-based
ATX size motherboards. |
|
|
Material: |
Heavy-duty cold-rolled
steel
|
Inside: |
Zinc-plated with
bright chromate
|
Outside: |
Texture-coated
|
Dimension: |
17"(D) X
19"(W) X 3.5"(H) |
Cooling: |
Standard:
Middle: 2 x 80x25mm fans
Rear: 1 x 97mm blower
|
Power
Supply: |
300/350W ATX-12V
single power supplies
|
Expansion: |
3 x PCI slots
via riser card or 7 low-profile slots
|
Controls: |
Power on/off,
system reset, and dual USB port
|
Indicators: |
Power, LAN, and
HDD LED's
|
System
Board: |
12”(W) x
9.6”(D) ATX size motherboard |
Drive
Bay: |
External 5.25" x
1
External 3.5" x 1
internal 3.5" x 3
Slim CD x 1
|
Temperature: |
0°C(32F)~50°C(122F
|
Humidity: |
5%-95% non-condensing
|
|
|
RC2-007 |
3 x 32-bit
PCI slots |
RC2-012 |
2 x 64-bit
PCI slots |
RC2-PAPTX-PCI |
2 x 64-bit
PCI + 1 x 4X AGP slots with offset AGP daughter
board |
RC2-PAPTX-AGP |
2 x 64-bit
PCI + 1 x 8X AGP slots with ribbon cable for
PCI |
RC2-PCITX-3N1 |
3 x 64-bit
PCI with bottom one slot on ribbon cable |
RC2-PCITX-3S1 |
3 x 64-bit
PCI with bottom two slot on ribbon cable |
RC2-012-R |
2 x 64-bit
PCI slots Reversed (require special back panel) |
|
|
BR-2U01 |
Center-mounting brackets (2U only) |
BR-2U03 |
Rear supporting brackets with 8” extension |
SR-20 |
20” ball-bearing slide rails with Q/D |
SR-26 |
26” ball-bearing slide rails with Q/D |
|
|
| Hot swap hard drive options |
RMC2A2-XP do not have Hot-swap Hard Drive.
Motherboard compatibility |
| |
Compatible |
|
Not Compatible |
|
 |
| NV300 |
SW310 |
HDAMB
Rev.D |
HDAMA Rev.G |
| SW300 |
LH500 |
LH510 |
LH520 |
| LV300 |
LV310 |
LV320 |
sw500 |
|
|
