1U RACKMOUNT/ RMC1K2-XP
 |
RMC1K2-XP is designed for High Performance Computing,
entry-level File Server or Web Server where
only a basic two-HDD configuration is needed
for RAID 0 or 1. This chassis supports a full
range of P4, Dual Xeon or Dual Opteron based
motherboards. |
|
|
Material: |
Heavy-duty SPGC
cold-rolled steel
|
Inside: |
Zinc-plated with
bright chromate
|
Outside: |
Texture coated
on front panel
|
Dimension: |
25.6"(D)
X 19"(W) X 1.75"(H) |
Cooling: |
Standard:
Middle: 5 x 40x28mm easy-swap fans
Rear: 2 x 40x28mm fans (13000 RPM)
Optional:
Middle: (optional 40x56mm upgrade)
|
Power
Supply: |
300W ~ 500W ATX/EPS
power supply
|
Expansion: |
1 full-height
expansion slot via riser card (up to 2-slot for
certain MB)
|
Controls: |
Power on/off,
system reset, and 1 x USB port
|
Indicators: |
Power, HDD and
LAN LED's
|
System
Board: |
Up to 12”(W)
x 13”(D) E-ATX/SSI EEB 3.5 compliant motherboards |
Drive
Bay: |
External 5.25" x
1
Slim FDD x 1
Hotswap Bay x 2
|
Temperature: |
0°C(32°F)
~ 50°C(122°F)
|
Humidity: |
5% ~ 95% non-condensing |
|
|
RC1-003 |
1 x 32-bit
PCI slot |
RC1-009 |
1 x 32-bit
PCI slot with ribbon cable |
RC1-010 |
1 x 64-bit
PCI slot |
RC1-010-R |
1 x 64-bit
PCI slot reversed |
RC1-014 |
1 x 64bit
PCI slot with ribbon cable |
RC1-017 |
1 x 4X AGP
1.5/3V slot |
RC1-PEXP16-RX1 |
1 x 16X PCI-E
slot |
|
|
BR-1U01 |
Center-mounting brackets (chassis w/ 437mm
width) |
BR-1U02 |
Rear suppoting brackets with 8" extension
(chassis w/ 437mm width) |
BR-1U03 |
Rear suppoting brackets with 3" extension
(chassis w/ 437mm width) |
SR-1U26-C |
26” solid-bearing slide rails with Q/D |
|
|
| Hot swap hard drive options |
RMC1K2-XP do not have Hot-swap Hard Drive.
Motherboard compatibility |
| |
Compatible |
|
Not Compatible |
|
Based on the motherboard layout, extension wires
/ cables for fan, Intrusion switch and other devices may be required.
They can be ordered separately.
** Special CPU Mounting Brackets required if CPU brackets are to
be mounted on chassis. Otherwise, standard bracket can be used. |