1U RACKMOUNT/ RMC1E2-XP
 |
RMC1E2-XP is specially designed for Cluster Node
Applications requiring pure CPU power but minimum
drive capacities. This chassis is fitted with
an excellent Push-and-Pull cooling design allowing
continuous airflow, thus results in a low chassis
ambient temperature. |
|
|
Material: |
Heavy-duty cold-rolled
steel
|
Inside: |
Zinc-plated with
bright chromate
|
Outside: |
Texture-coated
|
Dimension: |
21"(D) X
19"(W) X 1.75"(H) |
Cooling: |
Standard:
Middle: 1 x 120mm blower
Rear: 2 x 40x28mm fans
|
Power
Supply: |
200W ~ 350W ATX/EPS
PFC power supplies
|
Expansion: |
1 x PCI slot via
riser card
|
Controls: |
Power on/off and
system reset
|
Indicators: |
Power, LAN and
HDD LED's
|
System
Board: |
Up to 12”(W)
x 13”(D) E-ATX/SSI EEB 3.5 size motherboards |
Drive
Bay: |
internal 3.5" x
1
Slim CD x 1
|
Temperature: |
0°C(32°F)
~ 50°C(122°F)
|
Humidity: |
5% ~ 95% non-condensing |
|
|
RC1-003 |
1 x 32-bit
PCI slot |
RC1-009 |
1 x 32-bit
PCI slot with ribbon cable |
RC1-010 |
1 x 64-bit
PCI slot |
RC1-014 |
1 x 64bit
PCI slot with ribbon cable |
RC1-017 |
1 x 4X AGP
1.5/3V slot |
|
|
BR-1U01-N |
Center-mounting brackets (chassis w/ 426mm
width) |
BR-1U02-N |
Rear suppoting brackets with 8" extension
(chassis w/ 426mm width) |
BR-1U03-N |
Rear suppoting brackets with 3" extension
(chassis w/ 426mm width) |
SR-1U20-C |
20” solid-bearing slide rails with Q/D |
SR-1U26-C |
26” solid-bearing slide rails with Q/D |
|
|
| Hot swap hard drive options |
RMC1E2-XP do not have Hot-swap Hard Drive.
Motherboard compatibility |
| |
Compatible |
|
Not Compatible |
|
Based on the motherboard layout, extension wires
/ cables for fan, Intrusion switch and other devices may be required.
They can be ordered separately.
** Special CPU Mounting Brackets required if CPU brackets are to
be mounted on chassis. Otherwise, standard bracket can be used. |
